S3000 / S3010B
Radial Insertion Machine
Up to 18,000 CPH vertical radial insertion — the workhorse of a THT-automated EMS line
Cleaning & Process Support
S-1688 / SME800 SMT Stencil Cleaning Machine
Pneumatic or electric stencil cleaning that pays for itself in reduced print defects
- Closed-loop solvent circuit with multi-stage filtration
- Pneumatic (S-1688, no electrical parts in the cleaning zone) or electric (SME800)
- Rotating spray manifold plus heated drying cycle
- Compatible with IPC-approved stencil cleaning agents
Specifications
| Max stencil size | Up to 800 × 800 mm frame |
|---|---|
| Cycle time | Wash 3–6 min, dry 3–5 min |
| Filtration | Multi-stage, down to 5 µm |
| Drive | Pneumatic (S-1688) or electric (SME800) |
| Drying | Heated forced air |
| Solvent | Water-based or solvent agent, customer specified |
| Exhaust | Integrated extraction port |
| Power | AC 220 V, compressed air for S-1688 |
Applications
- SMT stencil maintenance
- Misprinted board recovery
- Squeegee and pump-down tool cleaning
- Fine-pitch and 0201 production
A dirty stencil is the cheapest defect source to fix and the most expensive to ignore. The S-1688 (pneumatic) and SME800 (electric) clean stencils, misprinted boards and squeegees in a closed solvent circuit, with filtration that extends bath life and keeps the cleaning room within exposure limits.
See it run
Machine in action
How to clean up SMT stencil to improve PCBA quality for EMS
How SME800 Auto Stencil Cleaning machine Optimizing SMT Yield Through Process Control
How to clean SMT stencil to improve PCBA quality|S-1688 Pneumatics Stencil Cleaner machiner
Downloads
Catalogs & datasheets
FAQ
Common questions
Pneumatic or electric — which is safer?
The pneumatic S-1688 has no electrical components in the cleaning chamber, which simplifies compliance where solvent vapour ignition risk must be documented. The electric SME800 gives higher spray pressure and shorter cycles where the cleaning room already carries the right classification.
More machines
Related equipment
S4000 / S4010B
Axial Insertion Machine
Horizontal axial and jumper-wire insertion with dual JW heads and 360° rotary table
S7900 / S7040
Odd-Form Insertion Machine
Automate the components nobody else can — transformers, connectors, heat sinks, tact switches, fuse holders
Talk to an engineer
Send us one board. Get a configuration back.
Share your highest-volume PCB and we will return a machine configuration with a payback calculation — free, and without a sales call attached.